To clean the pad, thoroughly hand wash with cold water and let it air dry. Do not machine wash.
How to Remove or Replace the 200/2000 Mop Pad:
- Slide the mop pad along the slot of the water tank, and then attach the pad firmly onto the velcro.
-
Fill the tank with water by opening tank lid, filling the tank with water, and reattaching the lid.
CAUTION: Do not rinse the water tank or immerse it in water. To avoid corrosion and damage, do not use any detergent, disinfectant, solid cleaner, or other cleaning products on the water tank.
CAUTION: Do not add hot water to the water tank, as this may cause it to become deformed.
-
Reinstall water tank. Slide the water tank horizontally into the bottom of the vacuum-mop until it clicks into place.
NOTE: If your robot needs water in the middle of a job, tap the power button or use the mobile app to pause. Remove the bin and add water. Reinstall the bin, and press the power button again to resume.
NOTE: Before using, wipe the electrode plates of the water tank clean with a dry cloth.
-
Place the robot back on the dock and use the app or robot's power button to start cleaning.
