What do I do if the Clean Base™ Charging Station + Automatic Dirt Disposal is Clogged?

If the indicator on the Clean Base™ Charging Station + Automatic Dirt Disposal is blinking red, this mean the Clean Base™ Charging Station + Automatic Dirt Disposal is clogged. Use the following procedure to clear the clog:

1. Push down the canister lid to ensure it is firmly sealed.

   

2. Remove any debris from the debris evacuation port on the bottom of the Clean Base™.

   

3. Unplug the Clean Base™ Charging Station + Automatic Dirt Disposal from the wall.

4. Place the Clean Base™ Charging Station + Automatic Dirt Disposal on its side. Loosen the five (5) screws retaining the debris evacuation tubing on the bottom. Remove the evacuation tubing and clear any clogs or debris.

   

If the problem persists, please contact iRobot Customer Care .

For expedited service, please have the following ready:

• Your robot charged and with you
• Your robot's serial number
• For warranty claims: Proof of purchase (receipt or invoice for purchase from an authorized retailer)