Virtual Wall® Halo
(optional accessory for select models)
The Virtual Wall Halo is perfect for homes with pets. It sets up a protective zone, gently guiding Roomba around your pet’s food and water bowls to keep the contents intact.
To set up the Halo, take the Virtual Wall out of the sleeve. Install the batteries, set the Virtual Wall to “Auto” mode and fully insert it into the sleeve. Make sure the Virtual Wall is inserted all the way into the sleeve. The circular lens should be completely visible at the top.
Place the Virtual Wall Halo on the floor, level with Roomba, and in close proximity to the bowls as shown below. If you have one bowl, put it beside the Halo, almost touching the wall. For two bowls, place one on either side.
Good
Bad
Tip: Virtual Wall Halo works on non-metal bowls less than >10 in (25 cm>) in diameter and up to >3.5 in (9 cm>) tall.
Tip: As battery levels of the halo get low, the field may not be strong enough to protect your bowls. If that happens, change the batteries.
